New router blamed for US nationwide flight ground stop
A newly installed router overloaded the Federal Aviation Administration's ageing communications network and triggered last Friday's nationwide ground stop, according to preliminary findings reported by US media and the FAA.

The FAA ordered a halt to all departures across the United States on Friday, November 13, for more than four hours. Arrivals continued, but many aircraft waited hours for gates, heise online reported, citing the Wall Street Journal.
According to the preliminary findings, the network was flooded with data shortly after the new device was switched on. The FAA has said it saw about 1,000 connection attempts every four to five seconds, causing instability in aircraft communications and radar feeds. The installation took place at a radio facility in El Dorado, Arkansas. A second device at a radar site in Amarillo, Texas, also overloaded the network, the Wall Street Journal reported.
The routers were being installed by the defence contractor L3Harris, which the FAA is paying to replace old copper lines with a fibre network. Work of this kind is normally done at night, but L3Harris asked for a window between 10:00 and 15:00 Eastern time. The reason has not been made public. The FAA has since disabled the transmission function of the new routers and paused further installations.
Officials have said the incident was not a cyberattack. Secretary of State Marco Rubio said on Wednesday that there was no evidence linking recent US technology outages to one another or to hostile actors. The findings on the router remain preliminary, and it is not established that the two devices were the only cause.
Transportation Secretary Sean Duffy has asked for $50 billion in special funding for new air traffic control infrastructure, heise reported. Federal auditors have warned for years that upgrading the FAA's telecommunications network could cause outages.



